20-21 September 2017, Melbourne, AUSTRALIA
26-27 September 2017, Rotorua, NEW ZEALAND
16-17 September 2015
Melbourne, AUSTRALIA
22-23 September 2015
Rotorua, NEW ZEALAND
WoodTECH provides a unique independent platform for Australasian companies to evaluate the very latest wood scanning, sawmilling equipment and mill maintenance tools from around the globe.

WoodTECH 2015 Event Summary

WoodTECH 2015 saw record numbers of Australasia’s sawmilling companies and local and international tech providers turn up. Details of those key suppliers from around the world involved in the series can be seen below. Two two-day events, one in Melbourne, Australia and the other in Rotorua, New Zealand ran with over 350 participating in the technology series run by the Forest Industry Engineering Association (FIEA).

To remain internationally competitive, local sawmills increasingly had been looking at tools and technologies that can be used to increase lumber yields, improve grade recoveries and get higher production speeds out of their saw-lines. Lowering the service or maintenance requirements of equipment and reducing the sawing costs for their operation was also high on the list of “must haves”.

Sawmillers in the last few years, with consolidation amongst both producers and equipment suppliers, increasingly were working much more closely with their technology providers. The last couple of years had seen the development of some of the most sophisticated sawing technologies and saw designs seen in recent times. WoodTECH 2015 provided a rare insight into some of these new developments for local mills.

As well as new innovations around sawing and wood scanning systems, case studies of companies investing and bedding in some of this new equipment was a key focus for the FIEA event. There was also a much greater emphasis on the practical issues around selecting, installing, commissioning and running saws. Renowned sawmilling experts from around the world led sessions on how saws within the mill are best aligned, maintained and operated to improve both sawing performance and a mill’s productivity.

Some of the trends being projected for future sawmilling were; simpler, high production mills with reduced manufacturing cost replacing complex mills, single pass sawmills becoming more commonplace, high speed 4 sided canters with multiple profilers and vertical arbor gangs were expected to process the majority of the wood under 400mm in diameter and high speed edgers were increasingly expected to be replaced by high speed board profiling.

Technology wasn’t the only emphasis for WoodTECH 2015. As well as new equipment, the environment in which the production team is working and interacting is a critical part of working smarter. From reconfiguring production lines in the mill through to finding faster ways to identify and reject unacceptable products, the returns through the power of the “team” are significant.

For the first time at a sawing event, teamwork – harnessing the collective power of saw-doctors, maintenance teams and production personnel on site was explored in depth. For the final session on both days the FIEA team turned the emphasis onto the most important resource – people working in the mill or within the company. On hand to look deep inside the subject of peoples’ performance was a keynote speaker from British Columbia, Steven Falk.

Across BC, Steven had used his ‘Switchback’ system with people from all walks of life to help build better teams. He and his team of facilitators had gained a reputation for listening to people and helping them to change. Their techniques have helped people go from non-communicative into top-performing team members. As a result, they had made huge improvements among teams working in mills and forests throughout western Canada.

As well as record attendances by sawmilling companies throughout Australasia, support and involvement from leading technology and equipment providers at WoodTECH 2015 was outstanding.

Key companies exhibiting in WoodTECH 2015 included;

Comact, Canada, USNR,USA/Canada, HewSaw, Finland, MiCROTEC, Italy, ScanMeg, Canada, Brunson Instrument Company, USA/UK, AriVislanda, Sweden, CalSaw, USA, JoeScan, USA, Checkmate Precision Cutting Tools, NZ,

Andritz Pulp & Paper, NZ, Metriguard, USA, HOLTEC Timber Technology, NZ, Keyknife/Braford Industries, Australia, WoodEye, Sweden, Thode Knife & Saw, Australia/NZ, Southern Cross Engineering, Australia/NZ, Signode, Australia/NZ, Automation & Electronics, NZ, Calibre Equipment, NZ, Lewis Controls/Corley Manufacturing, USA

Lucidyne Technologies, USA, Acora, Australia, Supply Services, NZ, Worksafe NZ, NZ, SEW Eurodrive, NZ, Packaging House, NZ, Brevini NZ, NZ, Competenz, NZ, Autolog, Canada, Soderhamn, Sweden, Skookum Technology, NZ, CarboTech International, Canada, EWD, Germany, DO2, Canada, Gilbert, Canada, SPRINGER, Austria, Finlease, Australia.

Sponsors & Exhibitors 2015

Latest Updates

Keep updated

Sign up to free updates on all the latest WoodTECH developments.

Contact

FIEA

Since 1998 the Forest Industry Engineering Association (FIEA), a division of Innovatek Ltd, has run an extensive series of technology related events for Australasian forest products companies. Over 200 conferences, trade shows and exhibitions have been run for local companies.

FIEA’s objective is to improve the performance and productive capability of forestry and wood products companies in the region. It is now recognized as one of the most effective information providers for the Australasian forestry & wood products industries.

FIEA Contact Details

  (+64) 7 921 1382
  1800 126 398 (from Australia)

Rotorua Office

Forest Industry Engineering Association
Building X91, Sala Street,
Rotorua 3010, New Zealand

PO Box 1230,
Rotorua 3040, New Zealand

Ph (+64) 7 921 1382

Dunedin Office

Forest Industry Engineering Association
c/o Distinction Dunedin Hotel,
6 Liverpool Street,
Dunedin 9016, New Zealand

PO Box 904,
Dunedin 9054, New Zealand

Ph (+64) 3 470 1902

Forest Industry Engineering Association: A division of Innovatek Ltd

Contact Form

Upcoming Events